OPTIKA-197-Lastnosti.jpg
Full wall PE pipes for protection of optical and RTV conductors

Properties

  • Home
  • Full wall PE pipes for protection of optical and RTV conductors – Properties

Properties of full wall PE pipes (for protection of optical and RTV conductors)

Pulling conductors into full-walled PE pipes has a number of advantages over conventional cable laying, including:

  • enabled flexible design of telecommunication network with optical cables and greater operational reliability
  • excellent physical properties such as high circumferential stiffness and impact resistance, which provide greater safety, durability, and lower costs
  • finely grooved inner wall for easier sliding and to prevent the conductor from twisting in the pipe
  • facilitated transport and storage, the pipes are wound in coils with an inner diameter of 1250 mm, which enables lower connection costs and, due to their flexibility, better adaptation to laying requirements
  • standard cable trailers can be used for transport and continuous laying of pipes in the ground
  • extraordinary corrosion resistance.

PE pipes for protection of optical and RTV conductors

The pipes are manufactured in accordance with STS-06/051 and also meet the Technical Regulations and Instructions of Telekom Slovenije for the use of telecommunications equipment and materials in the network.

Color marking lines are used to identify the purpose of the PE pipe. The marking lines are made by a special coextrusion process so that the marking remains permanent. Telekom Slovenije requires an orange color to mark small diameter PE pipes. Other colors for marking pipes are not excluded from the production program and depend on the wishes of the customer.